1998-2010 Ford, Mazda & Mercury V6 EDIS Ignition Coil - Horizontal Connector

Restore dependable ignition performance to your Ford, Mazda, or Mercury V6 with the Top Street Performance EDIS Ignition Coil Pack for horizontal connector applications. Engineered for 1998–2010 Ford V6 EDIS (Electronic Distributorless Ignition System) applications equipped with a horizontal harness connector, this direct-fit coil pack delivers up to 15% more spark output than the factory ignition coil — helping resolve misfires, rough idle, hard starts, and declining ignition performance caused by a worn or failing factory coil pack.

The horizontal harness connector design makes this a direct plug-in replacement for all Ford EDIS applications where the wiring harness connector plugs in from the side in a horizontal orientation. This is a critical fitment distinction — Ford EDIS coil packs come in both horizontal and vertical connector configurations depending on the vehicle and model year, and only the correct orientation will plug into your factory harness without modification. Verify your connector orientation before ordering. One coil pack is required per vehicle.

Compatible applications include the Ford Ranger (3.0L and 4.0L), Ford Explorer (4.0L), Ford Aerostar (4.0L), Ford Taurus (3.0L), Ford Windstar (3.0L), Mercury Mountaineer (4.0L), Mercury Sable (3.0L), Mazda B-Series (B3000 3.0L and B4000 4.0L), and other Ford and Mazda V6 EDIS applications using the horizontal connector configuration from 1998 through 2010.

Built with high-resistance epoxy construction, this coil pack withstands the shock and vibration demands of daily driving and high-RPM operation, delivering consistent spark energy across all six towers for the duration of the coil's service life. Whether you're resolving a misfire, performing a scheduled ignition service, or upgrading a high-mileage Ford or Mazda V6, this horizontal connector EDIS coil pack provides direct-fit installation and improved ignition output right out of the box.

EDIS Horizontal Coil Pack Technology
The Ford EDIS (Electronic Distributorless Ignition System) uses a wasted-spark coil pack design where a single coil pack fires pairs of cylinders simultaneously, eliminating the distributor and enabling more precise ignition timing control through the vehicle's ECU. This six-tower coil pack houses three individual coils, each firing a pair of complementary cylinders 360 degrees apart in the engine's firing order. The high-resistance epoxy encapsulation protects the coil's internal windings from shock, vibration, and thermal stress during sustained operation. The horizontal harness connector is the key fitment identifier for this coil pack — it is designed specifically for Ford and Mazda V6 EDIS systems where the wiring harness connector approaches from a horizontal direction. Verify your connector orientation before ordering — similar Ford V6 applications from the same model year range may use a vertical connector instead.

Performance Benefits
This EDIS coil pack is engineered to deliver up to 15% more spark energy than the factory Ford ignition coil, providing a stronger, more consistent spark across all six cylinders. The improved output supports more complete fuel combustion, resulting in stronger throttle response, smoother idle quality, improved cold-start reliability, and reduced misfire frequency — particularly valuable in higher-mileage Ford Ranger, Explorer, and Mountaineer applications where factory coil output has degraded over time.

COMPATIBLE WITH
FORD V6 ENGINES (EDIS HORIZONTAL CONNECTOR)
• 3.0 L / 182 in³
• 4.0 L / 245 in³

MAZDA V6 ENGINES
• 3.0 L / 2,967 cc (B3000)
• 4.0 L / 4,016 cc (B4000)

COMMON VEHICLE APPLICATIONS
Ford Ranger
Ford Explorer
Ford Aerostar
Ford Taurus
Ford Windstar
Mercury Mountaineer
Mercury Sable
Mazda B-Series (B3000 and B4000)

NOTES
• Direct replacement for Ford EDIS ignition systems equipped with a horizontal electrical connector.
• Compatible only with applications using the horizontal EDIS connector. Verify connector orientation before ordering, as similar applications may use a vertical connector.
• One ignition coil pack required per vehicle.
• Verify factory interchange number and vehicle application before installation.

SPECIFICATIONS
Coil Style: Coil Pack
Internal Construction: Epoxy
Maximum Voltage: 35,000 Volts (V)
Coil Wire Attachment: Female
Connector Orientation: Horizontal
Number of Towers: 6
Quantity: 1 Coil Pack (per vehicle)
Spark Output vs Stock: Up to 15% More
Spark Plug Wires Included: No
Ignition System Type: Ford EDIS (Distributorless)
Vehicle Year Range: 1998–2010
Compatible Makes: Ford, Mazda, Mercury