GM Type II Power Steering Pump - Chrome

This is a GM Type II (Saginaw TC series) hydraulic power steering pump with a chrome aluminum housing — with no reservoir included. It's built for remote reservoir power steering configurations, where the reservoir is mounted separately from the pump rather than integral to it. A compatible remote power steering reservoir must be sourced separately before installation.

This pump features a -10AN female inlet and -6AN female outlet for braided hose accessory drive setups, and a smooth press-on shaft for press-fit pulley attachment. A compatible press-fit pulley and press-fit installation tool are required — the smooth shaft is not compatible with screw-on hub pulleys or keyed-shaft pulley designs.

It's commonly used on GM LS engine swap projects, Corvette accessory drive systems, custom serpentine accessory drive conversions, and street rod and muscle car builds running a GM Type II bracket system with a remote reservoir configuration. Mounting hardware is not included. Verify bracket compatibility, remote reservoir clearance, inlet/outlet port style, pulley fit, and hose routing before installation. Fill and bleed the system after installation.

 

Chrome Type II Pump for Remote Reservoir Power Steering Configurations
This GM Type II (Saginaw TC series) pump delivers hydraulic power steering assist in a chrome aluminum housing, built specifically for remote reservoir setups where the reservoir is mounted separately from the pump. It features a -10AN female inlet, -6AN female outlet, and a smooth press-on shaft — no reservoir, reservoir cap, or mounting hardware included.

Press-On Shaft Requires a Pulley Tool and Compatible Press-Fit Pulley
This pump uses a smooth press-on shaft — not a screw-on hub or keyed shaft. Installation requires the proper press-fit pulley tool; pressing a pulley on or off without one can damage the shaft. A compatible press-fit GM Type II pulley is required and sold separately.

COMPATIBLE WITH
GM TYPE II (SAGINAW TC SERIES) POWER STEERING SYSTEMS
• Fits GM Type II (Saginaw TC Series) power steering bracket systems.
• Compatible with aftermarket serpentine accessory drive systems designed for GM Type II pumps.
• Designed for use with compatible remote or integral reservoir systems (sold separately).
• Fits applications using a press-fit power steering pulley.
• Verify bracket style, shaft type, pulley alignment, reservoir configuration, and hose routing before installation.

COMMON VEHICLE APPLICATIONS
GM LS engine swap projects
Corvette accessory drive systems
Custom street rod applications
Muscle car serpentine conversions
GM Type II / Saginaw TC bracket systems

NOTES
• Fits GM Type II (Saginaw TC Series) power steering systems only.
• Pump only. Reservoir, pulley, pulley hub, fittings, brackets, and hardware sold separately.
• Designed for press-fit power steering pulleys.
Verify reservoir style and fitting configuration before ordering.
• Verify pulley alignment and bracket compatibility before installation.
• Not compatible with GM Saginaw P-Series (Type 1) power steering pumps.

SPECIFICATIONS
Filter Included: No
Hose Port Type: Threaded
Housing Finish: Chrome
Housing Material: Aluminum
Inlet Attachment Type: Threaded
Inlet Diameter: -10 AN
Inlet Quantity: 1
Mounting Hardware Included: No
Outlet Attachment Type: Threaded
Outlet Diameter: -6 AN
Outlet Quantity: 1
Pulley Attachment Type: Press-on
Pulley Included: No
Remote Reservoir: Yes
Remote Reservoir Included: No
Reservoir Cap Included: No
Reservoir Included: No
Shaft Type: Smooth
Type: Hydraulic